Swiss Machining for Small, Slender & Complex Precision Parts
- Swiss CNC turning for small-diameter and long, slender parts
- Turning, milling, cross drilling, grooving and threading in one cycle
- Main-spindle and sub-spindle complete-part machining
- Metals and engineering plastics from prototype to repeat production
- Selected critical features down to ±0.005 mm after engineering review
- FAI, dimensional reports, material certificates and batch inspection support
- Drawings and procurement files are handled as confidential manufacturing information.

Swiss machining is most valuable when part diameter, length, feature density and repeat quantity justify a bar-fed process. OMNI reviews the geometry before selecting the most stable route.
Complete more features in fewer setups

Guide-Bushing Swiss Turning
The cutting zone stays close to the guide bushing, improving support for slender shafts, pins, needles and long precision profiles.

Live-Tool Turn-Mill
Driven tools add flats, slots, cross holes, off-center holes and milled details without moving the part to a separate machine.

Main & Sub-Spindle Machining
The sub-spindle receives the part for back-working, helping complete both ends and reduce secondary handling.

Bar-Fed Repeat Production
Automatic bar feeding supports consistent cycle times and controlled repeat production for small precision components.
Which parts are suited to Swiss machining?

- Precision pins and dowels
- Long shafts and threaded rods
- Bushings, sleeves and spacers
- Connector pins and electrical contacts
- Nozzles, jets and fluid-control parts
- Valve stems and miniature valve components
- Medical shafts, needles and instrument parts
- Custom screws and miniature fasteners
- Sensor, optical and camera hardware
- Automation and robotics components
Are your aluminum parts suitable for OMNI manufacturing?
Best results come from sharing the 3D model, dimensioned drawing, annual quantity and critical inspection requirements at the RFQ stage.
Swiss machining specifications
| Machining methods | Swiss CNC turning with guide bushing, main and sub spindles, live-tool milling, cross drilling, axial drilling, boring, reaming, grooving, threading, knurling and part-off. |
|---|---|
| Typical bar diameter | Approximately Ø1–32 mm for project review. Exact capacity depends on material, machine configuration, bar straightness and part geometry. |
| Typical tolerances | General precision features typically ±0.01 mm when geometry and material allow. Selected critical dimensions may reach ±0.005 mm after DFM and process validation. |
| Surface roughness | Ra 1.6 is common for controlled turned surfaces. Ra 0.8 or finer functional surfaces can be reviewed where tool access and material permit. |
| Production range | Engineering samples, pilot batches, bridge production and repeat medium-to-high-volume bar-fed production. |
| Quality documents | FAI, dimensional reports, optical/CMM results, material certificates, coating reports and batch inspection records by project requirement. |
| Recommended files | STEP/STP or Parasolid for geometry, plus a PDF drawing for tolerances, threads, surface finish, datums, burr notes and inspection requirements. |



