Micro CNC machining
Micromachining for miniature precision parts
- Miniature parts
- +-0.001mm
- Metal & plastic
- DFM review

Are your parts suitable for micromachining?

- The component has micro holes, tiny pockets, narrow grooves, fine slots, thin walls, miniature shafts, micro gears or delicate connector features.
- The part is too small or too detailed for conventional machining without tool breakage, burr risk, clamping distortion or unstable inspection.
- You need precise prototypes, low-volume parts or repeat production for medical, electronics, optical, aerospace, robotic or instrument applications.
- The design requires careful review of tool diameter, corner radii, depth-to-width ratio, surface finish, deburring and measurement strategy.
- Both metal and engineering plastic parts are possible when the material, tolerance and feature geometry are suitable for the process.
Send drawings, 3D files, material grade, quantity, critical dimensions, tolerances, surface finish and application notes. OMNI will review whether micro CNC machining, EDM, laser cutting, etching or a combined route is more suitable.

Fine Features
Tool access, holding, cutting sequence and inspection planning are reviewed before production.

Miniature Components
A strong route for small shafts, fittings, connectors, gears, shims and precision mechanical parts.

Controlled Process
Tool access, holding, cutting sequence and inspection planning are reviewed before production.
Typical parts suitable for micromachining
- Micro gears, micro shafts, miniature pins, bushings, fittings, sleeves, precision spacers and small mechanical assemblies.
- Electronic connectors, contact components, sensor housings, test fixtures, conductive parts and compact device hardware.
- Medical device components, surgical instrument details, microfluidic parts, needle-related components and small biocompatible metal parts.
- Optical mounts, miniature brackets, alignment parts, lens hardware, instrument components and laboratory device parts.
- Aerospace, robotics and automation parts that require lightweight geometry, precise holes, controlled edges and repeatability.
- Plastic micro parts made from ABS, PC, PA, POM, PMMA, PEEK, PTFE and other engineering plastics when suitable for CNC processing.

Micromachining materials

- Aluminum alloys: suitable for lightweight prototypes, housings, brackets, optical hardware and small precision structures.
- Stainless steel and carbon steel: used for medical parts, shafts, pins, fittings, fixtures, compact tooling and durable mechanical components.
- Copper, brass and bronze: useful for conductive contacts, terminals, inserts, micro fittings and electronic hardware.
- Titanium and nickel alloys: reviewed for medical, aerospace, high-temperature and corrosion-resistant miniature parts.
- Engineering plastics: ABS, PC, PA, POM, PMMA, PEEK, PTFE and other plastics for prototypes, insulators, medical or device components.
For very thin sheets, extremely small apertures or high-density patterns, OMNI may recommend chemical etching, laser cutting or wire EDM instead of conventional micro CNC machining.
Final tolerance depends on part size, material, feature depth, tool access, geometry stability, surface finish and the inspection method agreed for the project.
Micromachining capability
| Machining Types | Micro CNC milling, micro turning, small-hole drilling, fine slotting, miniature profiling, fixture-assisted machining and secondary finishing support. |
|---|---|
| Suitable Geometry | Micro holes, miniature shafts, small threads, thin walls, narrow grooves, precision pockets, tiny fittings, compact brackets, connectors and fine mechanical details. |
| Typical Size Range | Small and miniature parts from prototype-scale components to compact production hardware. Actual limits depend on workholding, tool diameter, material and inspection access. |
| Tolerance Planning | Critical tolerances, datum strategy, inspection method, burr control, edge breaks, surface finish and functional fit are reviewed before quotation. |
| Design Inputs | 2D drawings, STEP/STP files, material grade, quantity, surface finish, tolerance, critical feature notes and any assembly or application requirements. |
| Project Stage | Prototype validation, low-volume builds, engineering samples, small-batch production, repeat orders and inspection documentation by project. |
Industries suitable for micromachining

Electronics
Connectors, terminals, housings, sensor parts, test fixtures and fine conductive components.

Medical Devices
Small stainless steel, titanium and engineering-plastic parts for devices, instruments and prototypes.

Aerospace & Defense
Miniature brackets, pins, fittings, precision hardware and lightweight metal components.

Microfluidics
Small channels, manifolds, plates, fixtures and compact components for fluid-control projects.

Optics & Instruments
Alignment parts, mounts, lens hardware, laboratory fixtures and precision instrument details.

Robotics & Automation
Compact gripper parts, small motion components, fixture hardware and prototype mechanisms.
From drawing to micromachined component

Review
Check drawings, 3D files, material, tolerance, surface finish and critical micro features.

Plan
Define workholding, tool access, machining sequence, burr control and inspection method.

Machine
Use micro milling, turning, drilling or combined CNC operations to produce the part geometry.

Inspect
Verify key dimensions, surface quality, burr condition, assembly fit and drawing requirements.



