Precision laser cutting for medical devices
CNC laser cut medical parts for tubes, stents and instruments
- Micro slots
- Tube cutting
- Tolerance to 0.0003mm
- Inspection support

Are your medical parts suitable for laser cutting?

- The part is a stent, hypotube, catheter component, cannula, needle tube, endoscopic snake-bone joint, surgical tube or thin medical sheet part.
- The design needs micro slots, spiral cuts, fine holes, windows, reticular patterns, sharp instrument edges or customized tubular features.
- You need to process stainless steel, nitinol, titanium, cobalt-chrome, medical polymers, ceramics or other medical-use materials.
- Low burr, small heat-affected zone, clean edges, repeatable dimensions and reduced mechanical stress are important to the device function.
- OMNI can review tube diameter, wall thickness, cutting path, kerf, heat input, fixture design, cleaning, passivation, electropolishing review and inspection requirements before quoting.
Not sure whether laser cutting, CNC machining, EDM, chemical etching or stamping is best? Send us the drawing, material, tube diameter, wall thickness, quantity, tolerance and surface finish. OMNI will review the medical manufacturing route before quotation.

Micro Features
Add deburring, passivation, cleaning, polishing, electropolishing review, laser marking and dimensional checks.

Tube & Sheet Cutting
Support flat sheet, thin-wall tubes, capillaries, cannulas and selected 3D laser cutting routes based on geometry.

Finish & Inspection
Add deburring, passivation, cleaning, polishing, electropolishing review, laser marking and dimensional checks.
Typical medical parts suitable for laser cutting
- Nitinol stents, stainless steel stents, valve frames, coronary stents, neurointerventional stents and expandable support structures;
- Hypotubes, capillary tubes, catheter shafts, spiral-cut tubes, flexible tube sections, micro-slot tubes and medical guide components;
- Endoscopic snake-bone joints, cobra-bone structures, articulating tube sections, flexible endoscope parts and minimally invasive instrument links;
- Surgical instrument tubes, cannulas, needles, trocar sleeves, stapler tubes, ultrasonic scalpel tubes and orthopedic puncture needle slots;
- Orthopedic plates, cranial fixation sheets, dental brackets, orthodontic wires, implant trial components and patient-specific thin medical parts;
- Microfluidic devices, lab-on-chip features, diagnostic test components, drug-delivery features, microneedle structures and medical device electronic parts.

Medical laser cutting materials and finishes

Stainless steel 304, 316L and medical stainless grades: common for hypotubes, surgical tubes, cannulas, instruments, stents and corrosion-resistant medical parts.
Nitinol: selected for shape-memory and superelastic components such as stents, guide structures, flexible frames and interventional medical devices.
Titanium and titanium alloys: suitable for lightweight medical hardware, orthopedic sheets, fixation plates, dental components and implant-related development parts.
Cobalt-chrome and L605-style alloys: reviewed for stents, valve frames, high-strength thin-wall parts and demanding cardiovascular applications.
Medical polymers and biodegradable polymers: PEEK, PC, PU, PE, PLA, PGA and selected polymers for catheters, disposable parts, drug delivery and diagnostic devices.
Ceramics and specialty materials: alumina, zirconia and selected hard materials for dental, orthopedic, wear-resistant or bioinert components by project review.
Tell us the material grade, tube OD/ID, wall thickness, slot width, edge quality, cleaning requirement, quantity and inspection needs. We will check medical laser cutting feasibility before quotation.
Final tolerance, edge condition, heat-affected zone, burr level and lead time depend on material, thickness, tube diameter, wall thickness, feature size, cutting path, fixture design, finishing and inspection requirements.
CNC laser cut medical parts capability
| Service Scope | DFM review, CNC laser cutting, medical tube cutting, capillary cutting, fine slotting, micro-hole cutting, 3D laser cutting review, deburring, cleaning, polishing, passivation and inspection support. |
|---|---|
| Common Components | Stents, hypotubes, catheters, cannulas, needles, snake-bone joints, surgical instrument tubes, orthopedic plates, dental components, microfluidic parts and diagnostic device features. |
| Materials | Stainless steel, nitinol, titanium, cobalt-chrome, L605-style alloys, medical-grade polymers, PEEK, PC, PU, PE, PLA, PGA, alumina, zirconia and selected specialty materials by review. |
| Design Focus | Tube OD/ID, wall thickness, slot width, bridge width, kerf compensation, heat input, burr direction, support tabs, spiral features, mesh patterns, cleaning access and inspection datums. |
| Secondary Processes | Deburring, ultrasonic cleaning, passivation, electropolishing review, polishing, heat setting review for nitinol, surface cleaning, laser marking, packaging and assembly support. |
| Quality Planning | Dimensional inspection, microscope inspection, edge quality review, burr review, surface finish checks, material certificate review, traceability notes and project-based documentation. |
| Design Inputs | STEP/STP or DXF files, 2D drawings, material grade, tube OD/ID, wall thickness, feature size, tolerance notes, finish requirement, cleaning notes, inspection plan and quantity. |
ISO 9001:2015 certified quality system · ISO 13485. · Inspection documentation available by project · NDA support
Medical applications supported by laser cutting

Interventional Devices
Stents, valve frames, guide structures, nitinol baskets, expandable tubes and minimally invasive support components.

Catheters & Hypotubes
Micro-slot tubes, spiral-cut shafts, capillary tubes, fluid-delivery features and flexible catheter components.

Endoscopy
Snake-bone joints, articulating tube sections, cobra-bone features and flexible endoscopic motion structures.

Surgical Instruments
Cannulas, needle slots, stapler tubes, ultrasonic scalpel tubes, trocar sleeves and fine surgical instrument features.

Orthopedic & Dental
Fixation plates, cranial sheets, dental brackets, orthodontic wires, implant trial features and custom thin parts.

Diagnostics & Microfluidics
Lab-on-chip channels, microfluidic patterns, diagnostic plates, drug-delivery structures and device electronic features.
From medical drawing to laser cut component

Review
Check drawings, material, tube size, wall thickness, feature size, tolerance, heat sensitivity, finish and inspection needs.

Program
Plan CNC laser path, fixture strategy, rotation, kerf compensation, support points and cutting parameter window.

Cut
Laser cut slots, windows, spirals, meshes, holes or sheet outlines with controlled heat input and repeatable geometry.

Inspect
Apply deburring, cleaning, passivation or polishing as required, then verify dimensions, edges and documentation.



