Custom manufacturing for robotics components
Robotics parts for precision motion, automation and intelligent machines
- CNC + 5-axis
- 3D printing
- Robot assemblies
- CMM inspection

Are your robotics parts suitable for OMNI manufacturing?

- The part is a robotic joint, arm frame, end effector, gripper finger, actuator housing, sensor housing, gearbox cover, motor mount, shaft, spindle, connector, bracket, base plate or automation fixture.
- The design needs lightweight structure, high stiffness, precise bearing seats, gear alignment, cable routing, sensor positioning, threaded inserts, dowel holes, complex pockets or multi-axis machined surfaces.
- You need CNC milling, CNC turning, Swiss machining, 5-axis machining, sheet metal fabrication, 3D printing, metal casting, rapid tooling, surface finishing or assembly-test support.
- The project requires rapid prototype iteration, functional testing, low-volume production, high-mix robot components, repeatable dimensional accuracy or scalable manufacturing from a validated design.
- OMNI can review material choice, weight reduction, datum strategy, actuator interfaces, tolerance stack-up, fixture design, surface finish, assembly fit and inspection points before quotation.
Not sure whether your robot part should be CNC machined, 3D printed, sheet fabricated, laser cut, cast, forged or injection molded? Send us the CAD model, drawing, material, quantity, load direction, motion interface and inspection needs. OMNI will review the best manufacturing route before quotation.

Precision Motion Parts
Add anodizing, plating, passivation, coating, CMM inspection, material certificates and project documentation.

Prototype to Production
Use CNC, 3D printing, sheet metal, casting and hybrid routes to support validation, pilot builds and scale-up.

Finishing & Documentation
Add anodizing, plating, passivation, coating, CMM inspection, material certificates and project documentation.
Typical robotics parts and accessories
- Robotic arm frames, articulated joints, shoulder/elbow/wrist housings, joint covers, end plates, link structures and lightweight structural supports;
- End effectors, gripper fingers, vacuum gripper plates, tool changers, EOAT hardware, clamps, fingers, fixtures and robot tool mounting plates;
- Actuator housings, motor mounts, gearbox housings, transmission arms, drive shafts, spindles, couplings, gear blanks and precision alignment components;
- Sensor housings, camera mounts, LiDAR brackets, cable-routing parts, connector brackets, electronics enclosures and control-module support hardware;
- Mobile robot chassis parts, AGV/AMR plates, wheel hubs, caster mounts, battery tray parts, protective covers and sheet metal robot frames;
- 3D printed robot prototypes, SLS/MJF grippers, SLA mockups, SLM metal hinges, test models, jigs, inspection fixtures and low-volume custom automation parts.

Robotics parts materials and surface finishes

Aluminum alloys: common for robot frames, joint housings, grippers, end plates, sensor mounts, mobile robot chassis parts and lightweight structural components.
Steel and stainless steel: selected for shafts, spindles, transmission arms, brackets, high-load mounts, pins, fasteners and durable robot mechanical interfaces.
Titanium and magnesium alloys: reviewed for lightweight, high-strength robot parts, aerospace-style robotics, wearable robots and demanding motion systems.
Copper, brass and conductive alloys: useful for connectors, terminals, busbar-related robot parts, electrical hardware and sensor-interface components.
Engineering plastics: ABS, nylon, PEEK, POM, PTFE, UHMW and selected plastics can be reviewed for grippers, covers, wear pads, insulators and functional prototypes.
3D printing materials: SLA/DLP resins, SLS/MJF nylon, FDM thermoplastics and SLM/DMLS-style metal materials can be reviewed for prototypes and low-volume robot parts.
Finishes: anodizing, hardcoat anodizing, passivation, black oxide, plating, powder coating, painting, polishing, bead blasting, laser marking and protective packaging.
Tell us the material target, robot type, load case, motion interface, weight target, tolerance, finish, quantity and inspection requirements. We will check robotics manufacturing feasibility before quotation.
Final tolerance, strength, weight, surface finish, cost and lead time depend on the process route, material, part size, geometry, assembly requirements, finishing and inspection documentation.
Robotics parts manufacturing capability
| Service Scope | DFM review, CNC milling, CNC turning, Swiss machining, 5-axis machining, turn-milling, EDM review, 3D printing, sheet metal fabrication, laser cutting, casting review, rapid tooling, finishing, assembly and inspection support. |
|---|---|
| Common Components | Robot joints, arm frames, end effectors, grippers, actuator housings, gearbox covers, motor mounts, shafts, spindles, sensor housings, camera mounts, chassis plates, brackets, fixtures and automation tooling. |
| Materials | Aluminum, steel, stainless steel, titanium, magnesium, brass, copper, ABS, nylon, PEEK, POM, PTFE, SLA/DLP resin, SLS/MJF nylon, SLM/DMLS metals and selected robotics-grade materials by project review. |
| Design Focus | Weight reduction, stiffness, bearing seats, shaft alignment, gear mesh, actuator interface, cable routing, sensor position, dowel holes, flatness, perpendicularity, burr control, surface finish and assembly datum strategy. |
| Manufacturing Routes | 3/4/5-axis CNC machining, Swiss machining, CNC turning, sheet metal bending, laser cutting, welding, polymer 3D printing, metal additive manufacturing review, casting review and hybrid production routes. |
| Quality Planning | Dimensional inspection, CMM inspection, thread gauges, bearing fit checks, surface finish review, material certificate review, first article inspection, traceability support, PPAP/FMEA support by project and assembly documentation. |
| Design Inputs | STEP/STP files, 2D drawings, material grade, quantity, tolerance notes, load direction, motion interface, bearing/shaft information, finish/color, assembly requirements, inspection plan and target robot application. |
ISO 9001:2015 certified quality system · IATF 16949 · PPAP/FMEA support by project · CMM inspection available by project · NDA support
Robotics applications supported by OMNI

Industrial Automation
Robot arms, end effectors, tool plates, grippers, fixtures, machine-tending hardware and automated production components.

Collaborative Robots
Lightweight joints, safety covers, sensor mounts, wrist components, compact grippers and modular robot accessories.

Mobile Robots
AGV/AMR chassis plates, wheel hubs, caster mounts, battery trays, protective panels and navigation sensor brackets.

Medical Robotics
Surgical robot support parts, diagnostic automation hardware, clean housings, precision mounts and inspection-ready components.

Aerospace & Defense
Lightweight robot structures, drone-robot parts, inspection robot components and high-strength precision assemblies.

Research & Prototyping
Functional prototypes, 3D printed robot parts, test rigs, custom fixtures, validation samples and low-volume development builds
From robot concept to custom manufactured part

Review
Check CAD files, motion interfaces, load direction, material, weight target, tolerances, finish and documentation needs.

Select
Choose CNC machining, 3D printing, sheet metal, laser cutting, casting, tooling or a hybrid manufacturing route.

Build
Manufacture joints, frames, grippers, housings, shafts, brackets, chassis plates or fixtures using approved processes.

Inspect
Apply finishing, fit checks, CMM inspection, documentation, assembly support and protective packaging for shipment.



