Conformal Cooling 3D Printing Services

Metal additive manufacturing for mold cores and inserts with internal cooling channels that follow the cavity geometry—supported by thermal review, CNC finishing, polishing, pressure testing and dimensional inspection.

  • Tooling inserts from approximately 7–15 working days
  • Typical as-built dimensional reference from ±0.20 mm
  • Critical mold faces, datums and bores CNC finished
  • Tool steels, stainless steels and specialty alloys
Conformal Cooling 3D Printing Services

OMNI reviews cavity geometry, resin, wall thickness, hot spots, required cycle time, mold steel, flow circuit, pressure, polishing, machining allowances and validation requirements before selecting the channel layout and production route.

Engineer cooling performance as part of the mold insert

Engineer cooling performance as part of the mold insert

Conformal Channel Design

Curved internal passages can follow complex cores, cavities, ribs and local hot spots where straight drilled channels cannot maintain a consistent cooling distance.

Engineer cooling performance as part of the mold insert

Thermal & CFD Review

Review channel diameter, spacing, wall distance, inlet and outlet strategy, pressure drop, turbulence, flow balance and areas at risk of uneven cooling.

Engineer cooling performance as part of the mold insert

Metal Additive Manufacturing

Laser powder-bed fusion builds tool-steel or stainless-steel inserts layer by layer, enabling enclosed channels, split flow paths and compact tooling geometries.

Engineer cooling performance as part of the mold insert

CNC Finishing & Testing

Machine shut-offs, parting faces, datums, threads and sealing interfaces; then clean channels and perform dimensional, pressure, flow or leak checks as required.

The strongest projects have difficult heat concentration, long cooling time, visible warpage or geometry that prevents conventional drilled channels from reaching the critical area.

When does conformal cooling create the most value?

  • The tooling contains deep cores, tall ribs, complex cavities, thin sections, inserts, gate sleeves, hot runners or localized heat zones that are difficult to cool uniformly.
  • Current molded parts show warpage, sink, burn marks, gloss variation, inconsistent shrinkage or long cooling and demolding time linked to uneven mold temperature.
  • You need a new insert, a replacement core or a hybrid tooling solution combining printed internal geometry with conventionally machined external interfaces.
  • You can provide mold CAD, molded-part CAD, resin, current cycle data, coolant conditions and target improvements for a practical engineering review.
When does conformal cooling create the most value

For the fastest quotation, send the mold insert model, molded-part model and a PDF identifying resin, cycle time, inlet temperature, flow or pressure data, hot spots, critical mold surfaces and inspection requirements.

Capability data for early project planning

Final capability depends on alloy, channel geometry, build orientation, insert size, thermal distortion, machining allowance, heat treatment, polishing and validation requirements.
Build envelopeA general planning reference is up to approximately 300 × 330 × 450 mm on selected platforms. Large inserts may require segmentation, hybrid construction or a different machine route.
As-built accuracyA practical lower-limit reference is around ±0.20 mm for suitable geometry. Mold datums, shut-offs, bores, sealing faces and critical dimensions are normally CNC finished.
Layer & channel guidanceMetal powder-bed layer heights commonly fall in the 30–60 μm range. Channel diameter, wall distance and bend radius are reviewed against powder removal, pressure drop and structural strength.
Validation & documentationHeat treatment, channel cleaning, pressure or leak testing, flow checks, CMM reports, material certificates and first-article inspection can be arranged for critical tooling programs.
Scroll to Top