Custom sheet metal fabrication for vehicle programs
Sheet metal fabrication automotive parts for car panels, brackets and assemblies
- Laser cutting
- CNC bending
- Welded assemblies
- Automotive inspection

Are your automotive parts suitable for sheet metal fabrication?

- The part is an automotive housing, bracket, support, frame, cover, dashboard panel, bulkhead, shield, cabinet, bus component, SUV part, EV charging cabinet or vehicle sheet metal assembly.
- The design needs laser-cut outlines, formed flanges, bends, slots, louvers, ribs, mounting holes, welded seams, hardware inserts, ventilation features or assembly-ready panels.
- You need 2D laser cutting, 3D laser cutting review, stamping, CNC bending, CNC machining, welding, riveting, tapping, PEM hardware insertion or complete sheet metal assembly.
- The vehicle part must meet strength, toughness, fatigue resistance, weldability, corrosion resistance, dimensional accuracy and clean surface requirements.
- OMNI can review material thickness, bend radius, hole-to-bend distance, springback, weld access, fixture planning, cosmetic surfaces, coating allowance and inspection points before quotation.
Not sure whether your vehicle part should be sheet fabricated, stamped, CNC machined, die cast, forged or laser cut from tube? Send us the 3D model, drawing, material, thickness, quantity, finish and assembly notes. OMNI will review the fabrication route before quotation.

Cut & Formed Panels
Support anodizing, galvanizing, plating, brushing, polishing, powder coating, painting and protective packaging.

Welding & Assembly
Combine cutting, bending, machining, welding, riveting, tapping, inserts and assembly support in one coordinated route.

Coating & Protection
Support anodizing, galvanizing, plating, brushing, polishing, powder coating, painting and protective packaging.
Typical automotive sheet metal fabrication parts
- Automotive covers, body panels, underbody shields, splash shields, bulkheads, dashboard metal parts, access panels and protective vehicle sheet metal components;
- Brackets, supports, frames, cross members, mounting plates, battery tray brackets, EV controller supports and cable-routing sheet metal hardware;
- Engine heat shields, exhaust shields, muffler covers, thermal protection plates, fluid system brackets and high-temperature sheet metal parts;
- Bus, transporter, SUV, racing car and commercial vehicle housings, cabinets, panels, reinforcements, step plates and equipment structures;
- Seat support parts, hinge plates, latch brackets, interior metal panels, instrument supports, sensor brackets and vehicle assembly fixtures;
- Prototype car sheet metal parts, low-volume custom panels, repair parts, aftermarket components and production-ready sheet metal assemblies.

Automotive sheet metal materials and finishes

Aluminum sheet: common for dashboards, bulkheads, EV brackets, lightweight panels, racing car parts and corrosion-resistant automotive sheet metal components.
Stainless steel: selected for corrosion-resistant covers, brackets, exhaust-related shields, exposed panels and durable vehicle hardware.
Cold-rolled and hot-rolled steel: suitable for structural brackets, body reinforcements, frames, supports, welded assemblies and cost-effective vehicle parts.
Galvanized and coated steel: useful for outdoor-exposure parts, corrosion-protected panels, covers, cabinets and long-life automotive structures.
Copper, brass and specialty sheet metals: reviewed for electrical supports, grounding parts, heat-transfer components, decorative hardware and specialty vehicle assemblies.
Finishes: deburring, brushing, polishing, anodizing, passivation, zinc plating, galvanizing, e-coating review, powder coating, painting, silk screening and laser marking.
Tell us the material grade, sheet thickness, bend requirements, welding method, surface finish, color, quantity, inspection needs and vehicle environment. We will check automotive sheet metal feasibility before quotation.
Final tolerance, appearance, cost and lead time depend on material, thickness, part size, bend geometry, welding route, hardware insertion, finishing and inspection documentation.
Sheet metal fabrication automotive parts capability
| Service Scope | DFM review, 2D laser cutting, 3D laser cutting review, CNC bending, stamping review, CNC machining, drilling, tapping, welding, riveting, PEM hardware insertion, finishing, assembly and inspection support. |
|---|---|
| Common Components | Covers, panels, dashboards, bulkheads, brackets, supports, frames, heat shields, battery tray parts, EV cabinets, bus panels, SUV parts, racing car parts and custom vehicle assemblies. |
| Materials | Aluminum sheet, stainless steel, low-carbon steel, cold-rolled steel, hot-rolled steel, galvanized steel, copper, brass and selected specialty sheet metals by project review. |
| Design Focus | Bend radius, K-factor, springback, hole-to-bend distance, flange length, weld access, fixture design, cleanable edges, ventilation, louver design, PEM hardware location and cosmetic faces. |
| Surface Finishes | Deburring, brushing, polishing, passivation, anodizing, galvanizing, zinc plating, nickel plating, powder coating, painting, e-coating review, silk screening and laser marking. |
| Automotive Quality | Dimensional inspection, CMM inspection review, coating checks, weld inspection, material certificate review, first article inspection, PPAP/FMEA support by project and documentation support. |
| Design Inputs | STEP/STP files, 2D drawings, flat pattern if available, material grade, sheet thickness, finish/color, welding notes, hardware list, tolerance notes, annual quantity and automotive application requirements. |
ISO 9001:2015 certified quality system · IATF 16949 · PPAP/FMEA support by project · NDA support
Automotive applications supported by sheet metal fabrication

Body & Exterior
Covers, splash shields, access panels, body reinforcements, underbody plates, brackets and exterior sheet metal structures.

EV & Charging
Battery tray brackets, controller cabinets, charging station cabinets, cable-management hardware and electronic sheet metal supports.

Engine & Thermal
Heat shields, exhaust shields, muffler covers, fluid system supports, filter brackets and high-temperature metal protection parts.

Interior & Seats
Dashboard metal parts, seat brackets, hinge plates, instrument supports, latch hardware and interior mounting panels.

Commercial Vehicles
Bus panels, transporter brackets, SUV structures, truck covers, step plates, cabinets and durable transportation sheet metal.

Prototype & Aftermarket
Custom panels, repair parts, racing car prototypes, aftermarket brackets, fixtures and low-volume sheet metal assemblies.
From automotive sheet metal design to finished assembly

Review
Check CAD files, material, thickness, bend radii, welding notes, hardware, finish, tolerances and inspection needs.

Fabricate
Laser cut, punch, bend, machine, form, weld, rivet, tap and insert hardware based on the approved fabrication route.

Finish
Apply deburring, brushing, polishing, plating, galvanizing, anodizing, powder coating, painting or marking as required.

Inspect
Verify dimensions, welds, coatings, cosmetic faces, assembly fit and documentation before protective packaging.



