Aerospace additive manufacturing
3D printing aerospace parts for lightweight complex designs
- Lightweight geometry
- SLM/DMLS review
- Rapid prototypes
- Post-processing

Are your aerospace parts suitable for 3D printing?

- The part includes lightweight lattice structures, organic shapes, topology-optimized brackets, internal channels, ducts, manifolds or complex cooling passages.
- You need rapid prototype validation, design proofing, wind-tunnel models, assembly checking, tooling aids, fixtures or low-volume custom aerospace parts.
- Traditional CNC machining, casting, forging or sheet metal fabrication creates too much material waste or cannot easily make the required geometry.
- The project requires metal printing, engineering plastic printing, high-temperature polymer prototypes or a printed part followed by CNC machining and finishing.
- OMNI can review build orientation, support strategy, wall thickness, hole compensation, thermal distortion, post-processing allowance and inspection planning before quotation.
Not sure whether 3D printing, CNC machining, casting or sheet metal fabrication is best? Send us the 3D model, material target, quantity, tolerance, surface finish and application notes. OMNI will review the additive manufacturing route before quoting.

Lightweight Structures
Add stress relief, heat treatment, support removal, CNC machining, polishing, coating, marking and inspection where required.

Metal & Polymer Routes
Review SLM/DMLS-style metal printing, SLA prototypes, SLS/MJF parts and high-performance polymer options by application.

Post-Processing Support
Add stress relief, heat treatment, support removal, CNC machining, polishing, coating, marking and inspection where required.
Typical aerospace parts suitable for 3D printing
- Lightweight brackets, topology-optimized mounts, satellite hardware, UAV supports, payload mounts and custom structural development parts;
- Air ducts, ECS ducting concepts, fluid manifolds, fuel or hydraulic routing prototypes, internal channels and flow-optimized components;
- Engine development parts, turbine or fan models, combustion-related prototypes, exhaust features and high-temperature alloy trial components;
- Cabin interior prototypes, seat components, galley equipment, trim pieces, entertainment-system housings and custom passenger-experience parts;
- Avionics housings, antenna supports, RF enclosure prototypes, sensor brackets, connector covers and electronic aerospace hardware;
- Jigs, fixtures, assembly aids, inspection gauges, wind-tunnel models, tooling inserts and rapid development parts for aerospace programs.

Aerospace 3D printing materials and finishes

Aluminum alloys: reviewed for lightweight brackets, housings, ducting concepts, UAV hardware, thermal parts and development components.
Titanium alloys: selected for high strength-to-weight ratio, corrosion resistance and complex aerospace metal parts where weight matters.
Stainless steels: useful for robust prototypes, brackets, housings, test fixtures, tooling aids and corrosion-resistant printed components.
Nickel-based and high-temperature alloys: reviewed for thermal, engine-adjacent, exhaust, turbine model or demanding heat-related applications.
Engineering plastics and resins: SLA, SLS, MJF or high-performance polymer options for lightweight prototypes, interior parts, ducts and assembly aids.
Finishes: support removal, heat treatment, stress relief, CNC machining, bead blasting, polishing, coating, painting, anodizing for machined faces and laser marking.
Tell us the material target, build purpose, quantity, tolerance, surface roughness, inspection needs, operating temperature and whether the part requires post-machining. We will check additive feasibility before quotation.
Final tolerance, density, surface finish, strength and lead time depend on material, printing process, build orientation, support structure, part size, wall thickness, heat treatment, machining allowance and inspection requirements.
Aerospace 3D printing capability
| Service Scope | Design-for-additive review, metal 3D printing route evaluation, polymer 3D printing route evaluation, prototype builds, low-volume production review, post-machining, finishing and inspection support. |
|---|---|
| Printing Routes | SLM/DMLS-style metal additive manufacturing review, SLA resin prototypes, SLS/MJF nylon parts, FDM concept models, high-performance polymer review and hybrid printed-plus-machined parts. |
| Common Components | Lightweight brackets, ducts, manifolds, housings, turbine models, engine development parts, interior prototypes, UAV parts, jigs, fixtures, gauges and tooling aids. |
| Materials | Aluminum alloys, titanium alloys, stainless steels, nickel-based alloys, selected high-temperature alloys, nylon, resin, engineering plastics and selected high-performance polymers by project review. |
| Design Focus | Build orientation, support removal, wall thickness, lattice design, internal channel cleaning, overhangs, hole compensation, distortion control, surface finishing and post-machining datums. |
| Post-Processing | Support removal, heat treatment, stress relief, CNC machining, tapping, reaming, sanding, polishing, bead blasting, painting, coating, sealing, anodized machined surfaces and marking. |
| Design Inputs | STEP/STP or STL files, 2D drawings, material target, build purpose, tolerance notes, surface finish, operating environment, inspection requirements, quantity and post-processing needs. |
ISO 9001:2015 certified quality system · IATF 16949 · Inspection documentation available by project · NDA support
Aerospace applications supported by 3D printing

Aircraft Structures
Lightweight brackets, optimized mounts, ribs, support hardware, satellite components and complex structural development parts.

Avionics & Electronics
Sensor housings, RF enclosure prototypes, antenna supports, cable-routing features and electronics test fixtures.

Engine & Thermal
Turbine models, fan blades, combustion development parts, exhaust features, cooling channels and heat-related prototypes.

UAV & Drones
Payload mounts, motor supports, camera brackets, landing gear concepts, lightweight frames and custom drone hardware.

Cabin Interiors
Seat parts, galley prototypes, trim components, entertainment-system housings and customized lightweight interior pieces.

Tooling & Testing
Jigs, fixtures, gauges, wind-tunnel models, assembly aids and rapid engineering test components.
From aerospace model to 3D printed component

Review
Check files, material, build purpose, tolerances, wall thickness, internal channels, surface finish and inspection needs.

Prepare
Plan build orientation, support strategy, nesting, compensation, post-machining allowance and process route.

Build the part using the selected metal or polymer process, then apply support removal, heat treatment or curing as required.

Inspect
Verify dimensions, finish, post-machined features, assembly fit and documentation before protective packaging.



